Sunday, December 29, 2019

Got the BADGE !!!!

Finely after three years searching everywhere for the grille Badge, I saw on facebook marketplace that Michael R in US parted out an RO 1458. And yes he had a Badge (and also the three unique screws for the orange plastic cover sheets that I also missed) for my jukebox.

As the Badge are hard to find the price can sometimes be high, but the price Michael asked was resonably. The US postal cost to ship from US to Sweden was however not so resonable :-(

Anyway here it is, after water-sanding and polishing it looks great!




Mounted on the grille!




And the three screws!





Tuesday, October 22, 2019

Last post, now it's finished!

Finely........ I'm finished, and everything work great!





See Ya!



Dome glass

Sorry for not updating this blog for a while, but I will try to finish it now with some photos of the last steps.

The dome glass have been missing from beginning. I thougt it would be a piece of a cake to get a new glass, but it was impossible to find any glass at all! So I had to create a "glass" my self.

I bought a 4 mm thick SAN plastic sheet and made a curved template of wood (dont have any photos of it). Then I cut the plastic to the correct dimention and fixated it on the template.  I warmed the plastic carfully with my heat gun and let the plastic be bolted to the template for 4 weeks. I ended up with a pretty decent curved plastic sheet, not perfect but good enough!

Meanwhile waiting for the plastic to take the correct form, I made a Photoshop print file with the text 120, HI-FI and the large V-shape,  only the white, black and red colors was used here and the label was mounted to the backside of the plastic sheet.

If anyone needs the Photoshop files I can provide them, just make a note in this blog.


Here are my airbrush stuff which I used to paint the front top layer gold color with.
You can also see the Frisket masking film used to cut out the text "120". 
It took hours to make a perfect cutout, if you miss, there will be a hairline in the SAN plastic not possible to remove later!


Close up of the gold text & bottom line.
Of cource the gold text will be fragile but after hardening it seems to be quite ok.


Now it really looks like a real doome glass!



I also made this label.
 The dull & scratchy anodized aluminum frame was polished to gloss.


 Sorry but I dont have any photo on the finished doom glass, will upload it later.......




Tuesday, January 8, 2019

Turntable mech cover

The mech cover was flaking and looked dull so I decided to remove all paint and then polish the cover, after that I made mirrored water slide decals and finely I painted the cover from the backside with two colours, silver and green.
 This work was a really pita and took me a couple of weeks.



I used solvent (isopropyl) for removing the paint and it worked well for me on this application.
You have to be very careful when selecting solvent as most of them will affect the plastic, but this one worked fine!



After cleaning I polished the covers in and outsides.



Here are the mirrored labels, I scrapped a lot of them before I succeeded.



Two of the three water slide decals on place.
Not perfect, but good enough.



On the backside I first filled the stars with silver paint using the smallest brush I could find.
I painted the stars at least 20 times before I was satisfied and the paint was thick enough.
Then I airbrushed the inside (this was the easy part).



This looks really good.....at least from the backside :-)



Close up photo of one star. Looks good from the outside too!



Mech cover mounted and tone arm polished!


New DJ cartridge

This cartridge can handle 5-6 gr of tacking force.
Not as much as Rockola recomend wich is around 8-9 gr.



As the cartride was much higher then the original I had to gring down the two small screw towers inside the tonearm.



New design of the tonarm switch

As I have installed a new modern DJ cartridge with "low" tracking force 5 gr a new lead out switch solution was needed.
The lead out leaf switch pushes to hard (sideways) on the tonearm so I had to have a replacement switch not touching the tone arm mechanism. 
A proximity switch with a relay PCB card was the solution.


I 3D printed a nylon bracket for the proximity switch.


Here is the bracket the proximity switch senses at about 2mm distance.






Upper dome switches

WOW, someone is reading my blog, and giving me coments 😊 now I have to update it!

The three upper switches was in quite good shape so I just just brushed and cleaned them.



Some of the small contact fingers needed an minor alignment.

I bought a new select glas as the old was crap!


Monday, September 24, 2018

Airbrushing gold to the upper dome glass


The upper glass is screenprinted with red, black and white (transparent) colors on the backside. The front is printed with shiny gold. This is made for getting a "deep" in the text and it's realy cool and nice to look at! I have never seen a 1458 upper domeglass with the original gold screenprint on the front not faded, it seems to be standard that the front screenpring is more or less gone! Same with my glass, you can just imagine where the gold have been printed.


First problem was the knife to cutout the frisket foil. I had to build a knife with two parallell blades to get the the cutouts following each other, I first tried to cut by free hand and with a singel blad scalpel but it was impossible to get it right. This took me a couple of hours but it was well worth the invested time.


Here I have sprayd the gold paint over the the frisket plastic mask. I used Createx Wicked gold color,  in my opinion one of the best gold colors.


The result, not as good and sharp as a shiny screenpring but good enough!


The biggest drawback is that the paint is quite easy to peel of and the glass must be handled carfully.


Refurbish of plastic covers

The orange covers are ok regarding the shape, but of course dirty as everything else.
So I cleaned the covers but they where quite dull and boring, but a can of new 2K spray custom made paint made them look like new.
   
                     Not Cleaned                                   Cleaned                                   Painted

Upper program selection switches & buttons

The three buttons (blue, yellow & red) and switches rotates the title drum.  The switches did not work due to dirt/dust on the ultra-small leafs, everything had to be aligned and cleaned with solvent.



A half switch, cleaned  and two not yet aligned leafs for one button.


Fixing the 60 Hz Motor speed and heat

As the jukebox comes from US the turntable motor runs on 60 Hz.
Here in Sweden we have 50 Hz, so to correct that I bought a spring from Stamann in Germany to mount on the motor drive shaft. Well it did fit perfect BUT the speed was around 40 rpm so it was just a waste of time and money.

Next problem was the motor was running heat caused of the 50 Hz, motor was around 70 degrees C HOT and the windings will probably melt down over time.
A large metal resistor (82 ohms 25W) is the solution here, voltage went down to 100VAC and the heat went down to 35-40 degrees C, I can live with that but a 50 Hz motor should be my final solution.

The motor in pieces, no radial play in the bearings (will cause rumble), and a 2,5mm axial play seems ok.


As it was impossible to achive the speed 45 rpm it ended up in the workshop at my work.
With the spring diameter in mind I estimated the outer diameter to be 5,35 mm.

The new turned ABS tube installed and slightly grinded in place now gives 45,1 rpm :-)


 Temperature/voltage after adding the 82 ohms resistor in line with the 120 VAC. 
Note the resistors temperature!


This cooling fins will do it!

Sunday, June 17, 2018

Title strip drum

 Here is the title strip drum, it's in a quite ok shape, cleaning and adjustment is of course needed.
All the songs seems to be from the era l968-70 so I assume the jukebox have been standing in a barn the last 45 years!


 Rusty parts


Of course did I miss the markings on the cogwheels when I disassembled all the parts but I assume all markings on the three cogwheels should be in the same line....



New own custom made decals for the title drum

Tuesday, May 29, 2018

Push buttons, switches and light diffuser

Rust and dirt on the forty switches, a cleaning was of course needed.

All buttons except no 33 was ok, had to buy a replacement from Bill Butterfield CA USA


Color diffuser mech rusty.....

Not much of the colors is left on the diffuser glass.

All push buutons was cleaned and I found that no 33 was really bad so i orderd a replacement from Bill Butterfield (Music For Fun)  in US.





Transparent plastic foil was the solution.

Not bad at all :-)



Got the BADGE !!!!

Finely after three years searching everywhere for the grille Badge, I saw on facebook marketplace that  Michael  R in US parted out an RO 1...