Tuesday, April 3, 2018

Gripper mechanics

Gripper was a bit tricky to disassembel, the heatgun was needed as the grease was hard like glue.





Cleaned and ready for painting

at

1 comment:

  1. Jan Jansen HollandAugust 11, 2019 at 2:51 PM

    I am totally impressed, thanx for sharing, totally usefull for me

    ReplyDelete

Subscribe to: Post Comments (Atom)

Got the BADGE !!!!

Finely after three years searching everywhere for the grille Badge, I saw on facebook marketplace that  Michael  R in US parted out an RO 1...

  • Selector cleaning
    This was a PITA to do, as the springs loaded 30 pin's on the four sectors was almost impossible to get in place and fit intothe corresp...
  • Recapping and rebuilding the Rockola amplifier 31451-A
    As I bought a quite fresh amp I dont need to do anything on the outside except a little cleaning. I decided to replace all caps and resis...
  • Magazine motor & Gripper motor
    Magazine motor before cleaning and checking This motor have been refurbished, the grease was soft and the cable is in good shape also...