At facebook I found a guy here in Stockholm that have a vintage valve tester and for a decent sum was able to test all my valves.
My Wurlitzer 2310 tubes was checked at the same time, and also some other tubes that I have.
Here is the result:
Saturday, October 21, 2017
Checking amplifier & power supply Tubes
I got a lot of tubes but I have no clue if they are ok or not.
At facebook I found a guy here in Stockholm that have a vintage valve tester and for a decent sum was able to test all my valves.
My Wurlitzer 2310 tubes was checked at the same time, and also some other tubes that I have.
Here is the result:
At facebook I found a guy here in Stockholm that have a vintage valve tester and for a decent sum was able to test all my valves.
My Wurlitzer 2310 tubes was checked at the same time, and also some other tubes that I have.
Here is the result:
Subscribe to:
Post Comments (Atom)
-
As I bought a quite fresh amp I dont need to do anything on the outside except a little cleaning. I decided to replace all caps and resis... -
This weekend I did the Power Supply. It was a piece of a cake this time as I have done almost the same on my Wurlitzer from -59. The tw... -
Magazine motor before cleaning and checking This motor have been refurbished, the grease was soft and the cable is in good shape also...
No comments:
Post a Comment