This was a PITA to do, as the springs loaded 30 pin's on the four sectors was almost impossible to get in place and fit intothe corresponding hole, I first tryed locking them with a small plastic gas hose but that didnt work att all. The spring loaded pins just launched like mini rockets just looking on them.
Finely after weeks of testing different solutions to hold the pins, I invented the "opposit spring solution" which hold the pins/springs in place.
The inner diam of the corresponting spring must be 4,5mm (spot on) to work.
Here is the selector after opening up, with 120 coils/springs/pins and 6 clapper coil asm in the center
One of the four sectors before disassemby
The spring solution
Rubber hoses centers the springloded 30 pins.
Installed
No comments:
Post a Comment