Sunday, February 25, 2018

Recapping and rebuilding the Rockola amplifier 31451-A

As I bought a quite fresh amp I dont need to do anything on the outside except a little cleaning.
I decided to replace all caps and resistors just to be on the safe side.
I found new components at Elfa Distrelec https://www.elfa.se/, the shop is just 3-4 km away so I can easily go there by bus to grab what I need.


The two large 20 uF can electrolyt capacitors was replaced with six 22uF 450V.
I used a small blank circuit board for soldering all the caps and resistors.


I also replaced the PEC component with fresh new components on a circuit board 

All "small" components except the red diode and four large resistors was replaced.
After I replaced all components I measured them and I almost all was ok regarding the values so I assume the replacement was not needed at all!
I at least know the components will last the next 10-20 years.


Sunday, February 18, 2018

Rebuilding Rockola Power Supply 31460-A

This weekend I did the Power Supply.
It was a piece of a cake this time as I have done almost the same on my Wurlitzer from -59.
The two capacitors and the rectifier was replaced with new parts, I also cleaned the relay, connectors and checked/replaced the four fuses.


Inside the PSU before rebuilding.


I removed the PSU cabeling and painted the PSU



Nice and clean with a new Silicon-Bridge-Rectifiers to the left.



I drilled out the all the rivets and replaced them with polished stainless steel screws,
 added waterslide decals as a replacement for the screenprinting.
Looks almost as new :-)




Tuesday, January 30, 2018

Rebuilding the Rockola Accumulator 31251-A

I opened up the credit unit for a major cleaning, measured all coils, cleaned the switches, but it was impossible to get the cogwheel to work when the solienoid kicks in for counting down the credits, until I realized I missed the tiny tounge and spring that mounts on the solenoid tab.
Suddenly I remember that the seller gave me a part just before I left him and said "you will need this when rebuilding......"
I remember the words he said and looked in my boxes with one million parts parts, YES!!!
 I found the tounge/spring  in a small plastic bag!

I have also ordered new electrolyt capacitors and will swap out the 60 years old capacitor can.


The tiny tounge/spring

Mounted here:


Thursday, January 18, 2018

Jensen woofer is making scratchy noice

I thought the Jensen woofer was good, but after mounting the two 12" speakers the woofer starts scratch when I raise the volume. Guess the voice coil rubbs against the magnet structure. So my option is to rebuild the woofer or found a new one......I found a new one today, just 2 km from my home :-)
It is a 12" Bozak B-199Bc, this is a vintage high quality speaker, (from US I guess?)
Weight is around 5kg, it have a large Alnico? magnet , and the cage is aluminium casting.



Rebuilding tweeter horn

The tweeter horn is broken, no resistance at all when measuring :-(
I opened it up but it seems like the coil winding is cut off.
So I took one of my piezo electric tweeters (Motorola CTS)  and modified it (cut away the hopper) and glued it on the horn casting. A really quick and dirty work, but I think it will work quite well in the end!
The sound is a little bit harsh/bright so a capacitor in series with the piezo will reduce the level a bit.


Monday, January 8, 2018

Mounting the grille and frames

This weekend I fixed the coindoor frame, mounted the grille and the grille frames.

It was a real pita to get the grille frame (nice polished stainless steel) in place without any big gaps in the corner.
I bought the grille frame from Holland (Henk Jansen) and I got three large frame parts and six small plates to be glued to the larger frames, this took me six hours to fix.
I had to modify everything to get the frames right. But finely I was able to get it all in place :-)





Friday, January 5, 2018

Mounting 3M Di-Noc Architectural Finishes (Vinyl foil)



I decided to buy vinyl foil from 3M for the sides, as I couldnt found any real veneer I liked in the shops nearby.
I found this vinyl in Germany  on a webpage at Foliencenter24.
It's a piece of a cake to mount the foil and took no more then a few minutes to apply the foil.
Warm it with a heatgun and bend it round the coners....and you are finised!


I'm certenly impressed how good it looks and how easy it was to mount.


 First side is finished!
If you dont know it, you would take this for real wood.


It looks exactly as real veneer!
Even the grain is there!


Got the BADGE !!!!

Finely after three years searching everywhere for the grille Badge, I saw on facebook marketplace that  Michael  R in US parted out an RO 1...